Tag: Memphis hackerspace

Midsouth Makers leases a space at 2203 Freemont Rd

by on Dec.13, 2010, under Events, Meetings, News

Freemont Space - Shop (Image by Daniel Hess)

We’ve leased a space at 2203 Freemont Rd! We’ll be handing out keys to all paid members at the 12/17 Friday meeting at Republic Coffee. Google Maps: 2203 Freemont Rd. Memphis, TN 38114. If you are not yet a full member you can become one by paying dues for December. We’ll be discussing our initial move in plans at the meeting on Friday, we look forward to seeing you there.

The LAN party last Saturday was a great success, thanks to everyone that was involved in setup / clean up and a special thanks to our host, Jeff Leath and our very own Kevin Dunn for some really tasty chilli. Thanks to everyone that showed up even if you didn’t play, was great to see everyone.

Comments Off on Midsouth Makers leases a space at 2203 Freemont Rd :, , , , , , , , more...

Makers Look at Potential Hackerspace on Southern

by on Jun.10, 2010, under News, Workshops

Photo by Mary Potts

So for those who aren’t aware, we’re still alive and looking for potential locations to call home. After our visit to Nashville’s Hacker Consortium, spirits are rekindled and the drive is on again. Earlier this week we scheduled a viewing of a space that was located at 3527 Southern Ave, Memphis, TN 38111, and I must say that it was awesome! Now I know, we don’t want to get too excited about it as we may not get it, or even better find a space that is just that much more outstanding. Even still, it really is pretty cool. It really is a shame that more of the members couldn’t make it to check it out, but in place of that we did try to document things as best as possible on the Wiki. Pictures of the space are on the Wiki if you click on the thumbnail on the previous page, or you can always checkout the pictures on the Flickr account as well. From the pictures you’ll see that it could use a little care, and does lack a garage door, but everything else about it just screams “makerspace!” With everything around it like Brother Juniper’s, RP Tracks, and the University of Memphis, we could make great use of this location and the room that it has in it.

The space is approximately 2000 square feet and used to be a TV repair shop. The great thing about that is the fact of three phase power already being run to the location! It already has workbenches on one wall, and has a storefront that we could re-purpose for other things. You can check out simulated 3D photo of the main workshop at photosynth. There is just a lot to be said for the potential of the space. From the layout of the place, we would be able to build us a server room, possibly a kitchen, a storage closet, plenty of workbench space, individual cubbyholes, a lounge, and a maybe even a learning lab. We will be discussing all of this with everyone at the next couple of meetings to get ideas for potential layouts and what we can do to make the most of what is available. The owner has even generously agreed to give us the first month for free and $800/mo for the first year before raising the rent to the requested $900/mo. If we can get enough paying members interested this it really could become a reality quite soon.

Comments Off on Makers Look at Potential Hackerspace on Southern :, , , , , , , , , , , , more...

Local Memphis Hackerspace is Growing, Looking for a space

by on Apr.15, 2010, under Business, News

Looking towards the front of the space

Fellow Members, Builders, Tinkerers, Creators, and Makers,

Today, four of the board members met with a real estate agent, Bud Worsham, to scope out a potential space. We wanted to give Bud an idea of what we were about and what kind of space we were interested in. He showed us a small 1800 square foot warehouse at 132 Cumberland St. pictured is the inside of it. This did a couple of things for us. It gave us the feel of what we might be able to obtain as a group, a little better understanding of the interactions needed to obtain such a space, and an idea of cost that we could expect. The cost is slightly daunting at first, but is certainly not out of reach if we can all pull together to accomplish what we want.

At first glance it seems that everyone is very interested in the idea of having a space to work on projects and various other events. The catch is that everyone seems very interested, but lacks the interest to assist in the formation of a location of our own. This puts us in a very strange position. We need members to have funds, we need funds to have a space, and we need a space to have members. It becomes cyclical very quickly, and if we are unable to break that cycle, we will stagnate equally as fast. All of this means that we simply cannot do anything without biting the bullet, pulling together, and building our funds before we have a space.

With that being said, everything that we have asked for thus far in the way of dues is not mandatory. Since it is very obvious that we do not have a space to provide in turn for a fee, we are unable to set any sort of dues that could even remotely be considered mandatory. In fact, we never have, and never will set any type of mandatory payments so long as a space is not provided. It is best to instead consider this a pledge or donation to the group for a means to accomplish the goal that we have all expressed interest in, and of course If you need a good conveyancing service then my conveyancing specialist will be able to help. So currently we ask that anyone who wishes to assist us in moving forward, make a donation to the group. If it is a monthly pledge, fantastic. If it is a one time thing that you can do, wonderful. Every little bit helps, and we can’t make any of this possible without the help that you can provide.

Comments Off on Local Memphis Hackerspace is Growing, Looking for a space :, , , , , , , more...

Memphis Hackerspace Pictures from March 5th Makers Meeting

by on Mar.11, 2010, under Events, Meetings, News

March 5th Midsouth Makers Meeting.

Pictures have been uploaded from the March 5th Meeting. We had a great time and met some new friends from the local 2600 group. We had a few different projects shown off at this meeting including how to modify a cheap ink pen to write like an expensive writing instrument, Jim’s Arduino kit, Daniel’s scarf prototype and a handmade bracelet. We love hearing about any DIY projects or craft projects! Feel free to send us information about your project and we’ll feature it here on the Hackerspace Blog.

Don’t forget that you can keep up with the makers group by following us on twitter, becoming a fan on facebook, or even joining our Google Groups mailing list!

This weekend Daniel and Jim will be at our fan table at MidsouthCon! If you’re going to the con stop by and say hello. We’re having our usual meeting this friday March 12th at Republic Coffee, we hope to see you there. Feel free to bring a friend or a project!

Comments Off on Memphis Hackerspace Pictures from March 5th Makers Meeting :, , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Join Us Every Friday Night!


Friday Nights
7:00pm - 9:00pm

2804 Bartlett Rd
Suite 3
Memphis, TN 38134